home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CU Amiga Super CD-ROM 1
/
CU Amiga Magazine CD-ROM Special Edition (1995)(EMAP Images)(GB)[Issue 1995-11].iso
/
Aminet
/
misc
/
emu
/
ShapeShift3_0.lha
/
CHANGES
< prev
next >
Wrap
Text File
|
1995-06-11
|
4KB
|
81 lines
Changes from V2.0 (Aminet) to 2.0e
- All busy loops replaced by Wait(), no more deadlocks should occur
(especially when opening the serial port)
- SCSI routines are more compatible (but slower)
- Now you can select custom file system partitions as DeviceDisk
(enter the name in the ASL requester)
- The screen width is rounded to a multiple of 16
- The screen type "Amiga Bitplanes" will no longer calculate the
BytesPerRow but read them from the BitMap and multiply with the
color depth
- Selecting a CyberGfx mode will set the "Color depth" gadget
automatically
- The CyberGfx mode will respect the screen size settings
- Refreshes are done by a task, when the Amiga mouse pointer is
visible, there won't be any refreshes
- On a 68040, the MMU is used for the refresh to only refresh the
modified portions of the screen (except the Amiga 8 bit mode).
This can also be disabled with the "Write-protect ROM" switch.
The mouse pointer is still making problems.
- A refresh rate of 0 is intercepted and converted to 1
- Bug when closing the screen removed
- Better but not yet fully adapted to 68060
- Dynamic memory handling removed
- New option to pretend for the Mac that there's no FPU
- Cache handling more intensive, cache status will be restored to
the original state on quitting ShapeShifter
Changes from V2.0e to V2.0k
- SCSI routines are faster again
- Memory setting now with an integer gadget
- The Mac-to-Amiga floppy drive mapping is now adjustable
- Selecting LocalTalk will no longer crash the emulation
- Bus error handling revamped, VMM now runs if the ROM write-protection
is switched off
- Duplex mode in serial driver now works reliably
- Under "DeviceDisk 1/2" you may directly enter the name of a partition
- Booting with System 7.0.1 is possible (LocalTalk will no longer crash)
- Fixed mouse pointer problem with MMU refresh
- Support for Merlin graphics card
- Distinction between EGS Chunky and EGS VGA removed
- New option to prevent the Macintosh from accessing the FPU (for 68060)
- 68060 compatible when FPU and ROM write-protection are disabled
- CIA timer allocated using "lowlevel.library"
- Danish, french, and swedish catalog files
- PrepareEmul can now use Olaf Barthel's "shutdown.library"
Changes from 2.0k to 2.0l:
- "Do not use FPU" gadget is now ghosted correctly
- Added a boot drive selector in the volumes window
- DeviceDisks are now always fixed disks
- Option NOCOPYBACK to switch off the copyback cache
- ROM checksum is tested
- Using serial.device while ShapeShifter is running is now safe
- New screen type "Amiga window" that will display the Macintosh
desktop in a window on the Amiga workbench using the Amiga
mouse pointer. The size gadgets specifiy the window dimensions.
Changes from 2.0l to 2.0p:
- Amiga window screen type uses ObtainPen on V39
- Removed a bug when opening parallel devices in the serial driver
- The serial hardware handshake flag is now mapped to ACK handshake
on parallel devices
- Serial devices are now always closed on shutdown
- Ethernet support (MacTCP works)
- Now complains when there's not enough free memory for CyberGfx
screens
- Separate window for floppy disk settings
- Option to inhibit AmigaDOS from accessing floppy drives while the
Mac is running
- Refreshed modes read the screen base at every refresh, no more
screen trashing
- Option "Refresh always" to force a refresh even in 8 bit chunky
modes to prevent screen trashing
Changes from 2.0p to 3.0:
- Improved disk change detection
- Tooltype "720KKLUDGE" to allow 720K disks to be formatted
under System 7.5 without the 720K Disk Formatter extension
- More compatible to mfm.device V41
- Amiga window mode works under AmigaOS V37